BeagleBone Black JTAG Adapter Kit

Product Description

The BeagleBone Black comes from the factory without its JTAG connector installed.  This kit provides all of the hardware you need (except solder and soldering iron) to add a cTI 20-pin JTAG connector to the BeagleBone Black.  The kits also includes the ARM20cTI20 JTAG Adapter Board that converts the BeagleBone Black’s cTI 20-pin JTAG interface into a standard ARM 20-pin JTAG interface.  You can them connect the Flyswatter2 directly to the BeagleBone Black’s JTAG interface.

Included in the package:

• cTI 20-pin male header (unshrouded)
• ARM20cTI20 JTAG Adapter Board
• 20-pin (2 x 10) JTAG ribbon cable (length = 8 inches)
• Four 1 inch hex board standoffs
• Four #4-40 x 3/8" machine screws – Phillips pan head

Features:

• Open hardware – complete schematics provided
• RoHS compliant

 Notes: 

1. The ARM20cTI20JTAG Adapter board is designed to work with the Flyswatter2 (it does not work with the original Flyswatter).
2. This kit requires you to hand solder the cTI 20-pin male header onto the back of the BeagleBone Black board.  The solder and soldering iron are not included in this kit.

Documents:

• Kit Instructions
• ARM20cTI20 JTAG adapter board schematic
• BeagleBone Black JTAG information
• BeagleBone Black OpenOCD information